# Claude API Pricing vs OpenAI API Pricing for Coding

> Claude API pricing vs OpenAI API pricing for coding: Haiku/Luna, Sonnet/Sol and Fable/Astra tie on rates; caching, batch, long context and worked costs decide.

- Canonical HTML: https://omniakey.com/blog/claude-api-pricing-vs-openai-api-pricing
- Markdown: https://omniakey.com/blog/claude-api-pricing-vs-openai-api-pricing.md
- Published: 2026-08-16 (updated 2026-11-19)
- Author: Kiki, COO at OmniaKey
- Language: en
- Category: Cost control
- Reading time: 16 min
- All posts: https://omniakey.com/blog/llms.txt

---

**Claude API pricing vs OpenAI API pricing** lands on the same standard numbers at every rung of today's rate cards. Claude Haiku 5.5 and GPT-6 Luna both charge $0.10 per million input tokens and $0.50 per million output tokens. Claude Sonnet 5.5 and GPT-6.2 Sol both charge $2 and $10. Claude Fable 5.2 and GPT-6.2 Astra both charge $8 and $40 (official Anthropic and OpenAI rate cards, checked November 19, 2026).

**Updated November 19, 2026:** Every table and worked example below was rebuilt from the Claude 5.5 family, Claude Fable 5.2, GPT-6.1 and GPT-6.2 rate cards, and the three pairs now run Haiku 5.5 vs GPT-6 Luna, Sonnet 5.5 vs GPT-6.2 Sol, and Fable 5.2 vs GPT-6.2 Astra.

Cache reads, cache writes and long-context rules decide the rest of the bill. Above 272K input tokens, OpenAI doubles the input and cache rates and charges 1.5x the short-context output rate for that whole request. Anthropic holds standard rates across a 1M-token window on Claude 4.6 and later, with one exception: Haiku 5.5 steps up once a prompt passes 100,000 tokens.

A more expensive model can still be the cheaper way to finish a coding task when it needs fewer retries, misses fewer constraints, or writes less output. Start with the tasks you actually run, then compare billed tokens and finished results.

The [Claude plans and usage limits guide](https://omniakey.com/blog/claude-pricing) covers the subscription side, which sits on top of these API rates.

## Claude API vs OpenAI API pricing at a glance

|Decision|Claude API|OpenAI API|
|-|-|-|
|Low-cost input|Haiku 5.5 at $0.10|GPT-6 Luna at $0.10|
|Low-cost output|Haiku 5.5 at $0.50|GPT-6 Luna at $0.50|
|Balanced input and output|Sonnet 5.5 at $2 / $10|GPT-6.2 Sol at $2 / $10|
|Frontier input and output|Fable 5.2 at $8 / $40|GPT-6.2 Astra at $8 / $40|
|Cache hit|2.5% to 10% of input, by model|5% of input, 10% on GPT-6 Luna|
|Short cache write|1.25x input, 5 minutes|1.25x input, 30 minutes|
|Long cache write|2x input, 1 hour|2.5x input, 12 hours|
|Asynchronous batch|50% off input and output|50% off input and output|
|Native long context|Standard rates to 1M, except Haiku 5.5 above 100K|Higher full-request rates above 272K input|
|Cheaper across all three pairs|No|No|

The pairs moved with the lineups: Sonnet 5.5 now sits opposite GPT-6.2 Sol, where Sonnet 5 once sat opposite GPT-5.6 Terra, and Fable 5.2 sits opposite GPT-6.2 Astra, where Opus 5 once sat opposite GPT-5.6 Sol. The older pairs keep their own comparisons: [Claude Haiku 4.5 vs GPT-5.6 Luna](https://omniakey.com/blog/claude-haiku-4-5-vs-gpt-5-6-luna), [Claude Sonnet 5 vs GPT-5.6 Terra](https://omniakey.com/blog/claude-sonnet-5-vs-gpt-5-6-terra) and [Claude Opus 5 vs GPT-5.6 Sol](https://omniakey.com/blog/claude-opus-5-vs-gpt-5-6-sol).

Both columns describe direct provider list prices on the standard service tier. A model that costs more per token can still finish the same ticket for less money, so treat the table as the starting point for a token budget and nothing more.

## Current standard token prices

The order below is **input / cache read / output**, in USD per million tokens.

|Coding tier|Claude model|Claude price|OpenAI model|OpenAI price|
|-|-|-:|-|-:|
|Low-cost|[Claude Haiku 5.5](https://omniakey.com/claude-haiku-5-5)|$0.10 / $0.01 / $0.50|[GPT-6 Luna](https://omniakey.com/gpt-6-luna)|$0.10 / $0.01 / $0.50|
|Balanced|[Claude Sonnet 5.5](https://omniakey.com/claude-sonnet-5-5)|$2 / $0.10 / $10|[GPT-6.2 Sol](https://omniakey.com/gpt-6-2-sol)|$2 / $0.10 / $10|
|Frontier|[Claude Fable 5.2](https://omniakey.com/claude-fable-5-2)|$8 / $0.20 / $40|[GPT-6.2 Astra](https://omniakey.com/gpt-6-2-astra)|$8 / $0.40 / $40|

Two rungs sit outside the pairs. [Claude Opus 5.5](https://omniakey.com/claude-opus-5-5) sells at $4 input, $20 output and a $0.20 cache read, and OpenAI's nearest quote is GPT-5.6 Sol at $4 and $20 on a promotion that runs until November 30, 2026. One rung down, [GPT-6.1 Terra](https://omniakey.com/gpt-6-1-terra) costs $1 input, $5 output and a $0.05 cache read. The older [Claude Haiku 4.5](https://omniakey.com/claude-haiku-4-5) is still listed at the same $1 and $5, with a $0.10 cache read against Terra's $0.05.

Haiku 5.5 and GPT-6 Luna occupy the same row because they sell into the same budget, and the same goes for the other two pairs. The price table says what each model costs, not which one writes better code. Run the same tickets through both before you commit a month of spend.

The [live model catalog](https://omniakey.com/models) lists which of these models OmniaKey serves and at what price.

## Cache writes and cache hits are different charges

A cache hit costs a different share of input on almost every model, and the two vendors sell different write windows.

|Cache event|Claude API|OpenAI API|
|-|-|-|
|Cache hit|2.5% to 10% of input, by model|5% of input, 10% on GPT-6 Luna|
|Short write|1.25x input for 5 minutes|1.25x input for 30 minutes|
|Long write|2x input for 1 hour|2.5x input for 12 hours|

A 5-minute write on Sonnet 5.5 and a 30-minute write on GPT-6.2 Sol both cost $2.50 per million tokens. The long window runs $4.00 per million on Sonnet 5.5 for an hour and $5.00 on Sol for 12 hours. At the frontier, Fable 5.2 and GPT-6.2 Astra both charge $10.00 for the short write, then $16.00 against $20.00 for the long one. Haiku 5.5 and GPT-6 Luna both start at $0.125, and Opus 5.5 sits between the rungs at $5.00 and $8.00.

Caching repays that write only when the stable prefix is reused often enough. Track cache-write tokens, cache-read tokens and misses separately, because a prompt that changes near the top on every turn never collects the read discount.

A [message thread keeps the conversation on the server](https://omniakey.com/blog/claude-message-threads-api-guide), so later turns upload only the new messages instead of the whole prefix.

## Batch and Flex pricing

Anthropic's Batch API halves input and output tokens. OpenAI's Batch table halves every meter for GPT-6.2 Astra, GPT-6.2 Sol, GPT-6.1 Sol, GPT-6.1 Terra and GPT-6 Luna. That turns the 100K-input, 20K-output example below into $0.01 on Haiku 5.5 or Luna, $0.20 on Sonnet 5.5 or Sol, and $0.80 on Fable 5.2 or Astra.

Flex processing, which trades speed and availability for a lower price, has no published rate for GPT-6.2 Astra or GPT-6.2 Sol, and matches Batch for GPT-6.1 Sol, GPT-6.1 Terra and GPT-6 Luna. Fast mode moves the other way at twice the standard rate on both sides: $16 input and $80 output on Fable 5.2, $8 and $40 on Opus 5.5, and $16 and $80 on GPT-6.2 Astra.

Batch suits evaluation sets, offline classification, bulk review, or any work that does not need an interactive response. A coding agent waiting on the next tool call needs a synchronous tier.

Provider-hosted tools bill separately. Web search, code execution or another managed tool adds its own line to the invoice on top of model tokens.

OpenAI adds a 10% uplift to regional-processing data-residency endpoints for models released on or after March 5, 2026. Anthropic applies a 1.1x multiplier to US-only inference on Claude 4.6 and later. The tables above use standard global rates, so add the premium before you compare a residency-bound task.

## Long context changes the comparison

Claude 4.6 and later bill standard token rates across the full 1M-token window, with Haiku 5.5 as the exception: it charges $0.50 input and $2.50 output per million tokens once a prompt passes 100,000 tokens, counting cache reads and writes toward that length. A 900K-token request on Sonnet 5.5 or Fable 5.2 pays the same per-token rate as a 9K-token request.

OpenAI's GPT-6.x rate card carries separate long-context columns. Once input passes **272K**, the higher prices apply to the entire request:

- input and cached input become 2x the short-context rate;
- cache writes become 2x their short-context rate;
- output becomes 1.5x the short-context rate.

For GPT-6.1 Terra that means $2 input and $7.50 output per million tokens. GPT-6.2 Sol moves to $4 and $15, GPT-6.2 Astra to $16 and $60, and GPT-6 Luna to $0.20 and $0.75. Cached input doubles with the input rate in every case.

A 1M-token badge is therefore a capacity claim rather than a cost estimate. Retrieval, compaction and a smaller set of files often save more than a provider switch.

## What a short coding task costs

Assume one uncached request uses 100,000 input tokens and 20,000 output tokens. Exclude tools, retries, regional premiums and gateway pricing.

|Pair|Claude direct cost|OpenAI direct cost|
|-|-:|-:|
|Haiku 5.5 vs Luna|$0.02|$0.02|
|Sonnet 5.5 vs Sol|$0.40|$0.40|
|Fable 5.2 vs Astra|$1.60|$1.60|

Every pair ties at this size, because both vendors publish the same input and output rates at each rung. The arithmetic is reproducible:

```text
cost = input_millions x input_rate
     + output_millions x output_rate
```

Scale it by volume and the ties stay ties: 100 runs a day costs $2.00 on the low-cost pair, $40.00 on the balanced pair and $160.00 on the frontier pair, on either side of the comparison.

## What repeated cached work costs

Now assume the same 100,000 input tokens arrive as a warm cache hit and output stays at 20,000 tokens. Leave out the earlier cache-write charge.

|Pair|Claude cached run|OpenAI cached run|
|-|-:|-:|
|Haiku 5.5 vs Luna|$0.011|$0.011|
|Sonnet 5.5 vs Sol|$0.21|$0.21|
|Fable 5.2 vs Astra|$0.82|$0.84|

The frontier row is the one that moves, by two cents. Anthropic charges 2.5% of input for a Fable 5.2 cache hit, 5% on Opus 5.5 and Sonnet 5.5, and 10% on Haiku 5.5. OpenAI charges 5% on GPT-6.2 Astra, GPT-6.2 Sol and GPT-6.1 Terra, and 10% on GPT-6 Luna. Real savings still depend on prefix stability and the number of successful reuses.

## A 300K-input task tells a different story

Consider 300,000 uncached input tokens and 40,000 output tokens. That passes OpenAI's 272K line, so its long-context column applies to the whole request. It also passes Haiku 5.5's 100,000-token step, while Sonnet 5.5 and Fable 5.2 stay on standard rates for their full 1M-token windows.

|Pair|Claude calculation|OpenAI calculation|
|-|-:|-:|
|Haiku 5.5 vs Luna|0.3 x $0.50 + 0.04 x $2.50 = **$0.25**|0.3 x $0.20 + 0.04 x $0.75 = **$0.09**|
|Sonnet 5.5 vs Sol|0.3 x $2 + 0.04 x $10 = **$1.00**|0.3 x $4 + 0.04 x $15 = **$1.80**|
|Fable 5.2 vs Astra|0.3 x $8 + 0.04 x $40 = **$4.00**|0.3 x $16 + 0.04 x $60 = **$7.20**|

Between 100,000 and 272K input tokens, only the low-cost row separates: Haiku 5.5 has already stepped up to $0.50 input and $2.50 output, while GPT-6 Luna still pays $0.10 and $0.50. Above 272K, OpenAI's long-context column flips the two bigger rows: GPT-6.2 Sol bills $0.80 more than Sonnet 5.5 and GPT-6.2 Astra bills $3.20 more than Fable 5.2, while GPT-6 Luna stays the cheaper side of the low-cost pair at $0.09 against $0.25. Tokenizers also differ, so compare billed usage rather than character counts.

## Where OmniaKey prices fit

OmniaKey serves supported Claude and GPT models from one prepaid balance, and its catalog quote moves on its own schedule. The [current price list](https://omniakey.com/pricing) carries today's number for every model, and that quote sits beside the two provider rate cards rather than inside them.

The [balance and usage guide](https://docs.omniakey.com/en/api/balance-usage) shows how to read spend from your own ledger, and the [Claude Code pricing guide](https://omniakey.com/blog/claude-code-pricing) covers the separate subscription-versus-API decision.

## Choose by task, not provider logo

Start with Haiku 5.5 or GPT-6 Luna when the task is narrow, repeatable, cheap to verify and high volume. Both cards read $0.10 and $0.50 up to a 100,000-token prompt on Claude and 272K input on OpenAI, so run your own eval set through both and keep the one that needs fewer retries.

Sonnet 5.5 and GPT-6.2 Sol cost the same $2 and $10 for daily repository work, which leaves fit with your tooling as the tiebreaker. Above them, Claude Opus 5.5 at $4 and $20 is the model Anthropic recommends starting on for most coding and knowledge tasks (checked November 19, 2026), while OpenAI's nearest quote is GPT-5.6 Sol's $4 and $20 promotion through November 30, 2026.

At the top, Fable 5.2 and GPT-6.2 Astra are level at $8 and $40, and Fable 5.2 reads a cached token for half of Astra's $0.40. Anthropic's own advice is to start on Opus 5.5 and move up to Fable 5.2 only when a task still defeats it (checked November 19, 2026). The [Astra vs Sol comparison](https://omniakey.com/blog/gpt-6-2-astra-vs-sol) covers the choice inside OpenAI's lineup.

For a wider view of model families, use the [coding-model guide](https://omniakey.com/blog/best-llm-coding-agents).

## Compare completed-task cost

Token cost is one term:

```text
completed-task cost = runs that pass your tests
                    + failed attempts and retries
                    + provider-hosted tool charges
                    + developer correction time
```

Record model ID, protocol, effort, input, cache write, cache read, output, tool calls, retries, elapsed time and whether your tests passed. Compare the same repository commit and the same test command. Without that control, a cheap transcript can hide an expensive failed task.

## Final verdict

**Claude API and OpenAI API post the same standard rates at all three rungs: $0.10 and $0.50 for Haiku 5.5 and GPT-6 Luna, $2 and $10 for Sonnet 5.5 and GPT-6.2 Sol, $8 and $40 for Fable 5.2 and GPT-6.2 Astra. Claude reads a cached token for half Astra's price at the frontier, OpenAI sells a 12-hour cache window against Claude's one hour, and above 272K input tokens OpenAI's full-request multiplier makes Sonnet 5.5 and Fable 5.2 cheaper than GPT-6.2 Sol and GPT-6.2 Astra.**

Every pair ties at 100K in and 20K out. The bill separates on cache hits at any prompt size, on Haiku 5.5's 100,000-token step, and on how each vendor treats a prompt past 272K tokens. Match models to the task, count cache writes and tools, then measure what a finished task costs on the access path you will use.

## Frequently asked questions

### Is Claude API or OpenAI API cheaper?

On today's rate cards the three pairs tie. Haiku 5.5 and GPT-6 Luna both cost $0.10 input and $0.50 output per million tokens, Sonnet 5.5 and GPT-6.2 Sol both cost $2 and $10, and Fable 5.2 and GPT-6.2 Astra both cost $8 and $40. Cache-hit prices differ at any prompt size, Haiku 5.5 steps up past 100,000 tokens, and OpenAI's long-context column applies past 272K.

### What is the main difference between Claude and OpenAI API pricing?

Anthropic prices a cache hit per model at 2.5% to 10% of input and sells 5-minute and 1-hour writes. OpenAI charges 5% of input on the GPT-6.x models and 10% on GPT-6 Luna, with 30-minute and 12-hour windows. Above 272K input tokens OpenAI doubles input and cache rates and charges 1.5x output for the whole request; Claude holds standard rates to 1M except Haiku 5.5 above a 100,000-token prompt. Both halve batch prices.

### Which API is cheaper for long context?

At 300K input and 40K output, Sonnet 5.5 costs $1.00 against GPT-6.2 Sol's $1.80, and Fable 5.2 costs $4.00 against GPT-6.2 Astra's $7.20. OpenAI's long-context column drives the gap, so check billed usage rather than character count.

### Are Claude and ChatGPT subscriptions included in these prices?

No. These are developer API token rates. Claude and ChatGPT subscriptions have separate allowances and terms. Do not compare a monthly plan directly with one million API tokens.

### Can one API key access both Claude and GPT models?

An OmniaKey account reaches supported Claude and GPT models from one prepaid balance, through Anthropic-compatible or OpenAI-compatible endpoints. Each request still names the model and the protocol.

### Do Batch discounts work for interactive coding agents?

Usually not as a drop-in replacement. Batch is asynchronous and fits offline work. Interactive agents need the next response to continue tool use, so standard or another synchronous service tier is normally the relevant comparison.

## Sources checked

- [Anthropic API pricing](https://platform.claude.com/docs/en/about-claude/pricing)
- [Anthropic pricing](https://www.anthropic.com/pricing)
- [Anthropic: Claude Fable 5.2 and Mythos 5.2](https://www.anthropic.com/claude-fable-and-mythos-5-2)
- [Anthropic model overview](https://platform.claude.com/docs/en/about-claude/models/overview)
- [OpenAI API pricing](https://developers.openai.com/api/docs/pricing)
- [OpenAI GPT-6.2 Astra](https://developers.openai.com/api/docs/models/gpt-6.2-astra)
- [OpenAI GPT-6.2 Sol](https://developers.openai.com/api/docs/models/gpt-6.2-sol)
- [OpenAI GPT-6.1 Terra](https://developers.openai.com/api/docs/models/gpt-6.1-terra)
- [OpenAI GPT-6 Luna](https://developers.openai.com/api/docs/models/gpt-6-luna)

_Provider rates were rechecked November 19, 2026. Prices, regional premiums, service tiers and tool charges change; check both official pricing pages and the live catalog before you set a budget._
